|
 Download Applications Introductions SceneLCS_DM_1.0e.pdf (2012-05-16)
|
The ACS50 is among the most appealing of the products in the SLCS catalog. It has a touch panel interface and a D-Bus interface. It comes in a selection of 3.5" or 5.7", and may be installed onto a control panel.
The ACS50 can be likened to a bunch of virtual switches arranged into pages, e.g. 1F, 2F and so on. Each switch can be labeled with a descriptive name and shows the status of its associated switch in real time, with an audible feedback when a switch is pressed.
One can even place a floor diagram or an elevation diagram for more convenience in use.
|
|
K80 Smart Dimmer can be used with classic switches to achieve a gradual fade in/out effect to reduce the glare that is the result of sudden light changes.
Maximum load: 600W
Suitable for AC Halogen lamps, dimmable AC LED lamps.
Can be used with the LT4500 or KT454 to achieve a pattern dimming effect or any 0~10V dimmer controller.
|
|
IS40 - 4 Button Zoned Pattern Digital Switch |
IS40 has 4 buttons, each button holds one pattern
Each button has indicators lights and can be labeled with the pattern that it represents
Can be configured from the rear with the zone numbered from 1 to 15, each zone can have up to four IS40 (representing 16 patterns)
Connects with the KT controller modules using 4C flat cable, no need for a separate power supply.
|
|
|
LT3506 - 6 Channel Addressable Relays |
LT3506 is a 6 channels addressable module.
Each channel support a maximum load of 220VAC/6A
On board buttons allow manual control of each relay.
Suitable for all lighting types.
|
|
KT454 - Dimmer Controller |
KT454 has 4 channels of 0~10V analog output (for use with the K80 or third party dimmers with 0~10V input)
Requires the appropriate type of external dimmer for any given lighting type
Suitable for halogen, fluorescent or LED lights
Each channel can drive up to 10 external dimmers.
|
|
|
|
|
|
ACS50-1.1e.pdf (2012-03-08)
